← Back to blog

How Contractors Should Allocate a Marketing Budget

November 22, 2026
How Contractors Should Allocate a Marketing Budget

A contractor should allocate marketing budget in a fixed order: work out how many booked jobs the business needs, price the leads those jobs require, fund call tracking and follow-up first, and only then split the rest across ad channels. Most wasted spend comes from skipping that order and paying for more traffic that the office never turns into scheduled estimates. At Leapify Media we build the tracking, dispatch and ad management that sit behind that order, so the budget is judged on booked jobs rather than clicks.

Leapify Media
Make More of Every Marketing Dollar
Leapify Media builds AI-powered systems for home service companies to turn marketing spend into booked jobs and improve lead conversion.
Visit

TL;DR

  • Start from the job count you need, not a percentage of revenue: jobs needed, then leads needed at your close rate, then budget at your cost per lead.
  • Fund lead capture and tracking before you buy more traffic: call tracking, a quote form that works, missed-call text-back and a CRM.
  • Split what remains by channel using booked revenue and margin, and keep a small share for testing.
  • Raise spend only on sources that produce profitable booked jobs, and only when your crews have capacity.
  • Review a source report monthly: calls, forms, estimates, booked jobs and revenue by source.

Table of Contents

Why a percentage of revenue is only a starting point

You will see rules like "spend 5 to 10% of revenue on marketing." They are fine for a sanity check and poor for a decision, because two contractors with the same revenue can need very different budgets.

The Ben In Denver field guide makes the point with a formula: new customers needed equals your revenue goal divided by average customer lifetime value, times the share of customers you do not retain. Multiply by your blended customer acquisition cost (CAC, the total marketing and sales cost of winning one customer) and you have the budget. In its example, a $5M business aiming for $6M with $4,000 lifetime value and 30% retention needs 1,050 new customers. At a $275 CAC that is $288,750, about 4.8% of revenue. At a $400 CAC it is $420,000, or 7%.

Marketing budgets compared at two acquisition costs

Same revenue, same goal, a budget that differs by $131,250. The difference is how efficiently each business turns spend into customers. That is why you size the budget from your own numbers and use percentages only to check the result.

Step 1: Work backward from booked jobs

You need four numbers, all of which your invoicing and call records can give you:

  1. Revenue goal for the year.
  2. Average job value, ideally by service line, since a tune-up and a system replacement are different animals.
  3. Close rate: the share of leads that become paid jobs.
  4. Cost per lead from each source you use.

The math runs like this: jobs needed equals revenue goal divided by average job value. Leads needed equals jobs divided by close rate. Budget equals leads times cost per lead.

A worked example

This is an illustration, not a benchmark. Say an HVAC company wants $3,000,000 in marketing-driven revenue at a $6,000 average job.

  • Jobs needed: $3,000,000 ÷ $6,000 = 500.
  • At a 40% close rate, leads needed: 500 ÷ 0.40 = 1,250.
  • At a blended $90 per lead, budget: 1,250 × $90 = $112,500.

That is 3.75% of the revenue goal. Now improve the close rate to 50% by answering faster and following up. Leads needed drop to 1,000 and the budget to $90,000, with the same 500 jobs. Fixing conversion is worth $22,500 here before a single ad is changed.

If your close rate is unknown, that is your first finding. Count last quarter's inbound calls and forms against paid jobs, by source.

Step 2: Adjust for margin and crew capacity

The formula tells you what the budget must be to reach a goal. Two limits decide whether you should actually spend it.

Margin. Your cost per booked job has to leave profit after labor, materials and overhead. A roofing job with a healthy margin can carry a higher acquisition cost than a low-margin maintenance visit. Compare cost per booked job against gross profit per job, not revenue per job. Our guide on six acquisition costs contractors often miss covers the items that quietly inflate CAC, such as the time your office spends on leads that never book.

Capacity. Leads you cannot serve are expensive. If your install crews are booked three weeks out, more demand pushes customers to a competitor who can show up sooner and lengthens the wait for the people you already booked. Tie spend to open schedule slots by service line: push the lines with room, hold the ones that are full.

Seasonality belongs here too. HVAC, roofing, landscaping and turf all have peaks. Plan the budget by month against your real calendar so you are not spending hardest when crews are already full, or starving the shoulder season you need to fill.

Step 3: Fund capture and tracking first

The first bucket is not ads. ProTradeHQ's contractor budget guide puts lead capture and tracking at the top: call tracking, a working quote form, missed-call text-back, a simple CRM and a monthly source report of calls, forms, estimates, booked jobs and revenue. The logic is simple. If calls arrive and do not become scheduled estimates, more traffic just buys more missed opportunities.

In practice that bucket covers:

  • Call tracking by source, so a phone call is tied to the ad, listing or page that produced it. For HVAC and plumbing, where most jobs start with a call, this is the single most important line.
  • Missed-call text-back, so a caller who reaches voicemail gets a reply within seconds. See our missed call text back guide.
  • A CRM that records each lead's stage from first contact to paid invoice. Without it, cost per booked job is a guess.
  • Lead scoring, so your team calls the buyer ready to book before the price shopper. We explain how in lead intent scoring for home service companies.

This is where we put our own engineering. Our On-Premise AI Dispatch runs at $1,000 per month with a one-off $7,500 setup fee, and CRM Integration starts at $3,000 one-off. Both are built so the data tying spend to booked jobs stays proprietary to you. Our piece on fixing tracking before bids shows why this comes before any bid change.

Step 4: Split the rest across channels

Once capture works, divide the remaining budget by what each channel has actually produced. A common starting framework is 70-20-10: roughly 70% on proven channels, 20% on promising ones you are scaling, and 10% on experiments. It is a rule of thumb, not a law, and it works because it forces a protected testing slice instead of an all-or-nothing bet.

For a home service business, the channel menu usually looks like this:

ChannelWhat it doesHow to judge it
Google Ads (search)Captures people already searching for your serviceCost per booked job, call quality
Local Services AdsPay-per-lead listings at the top of local resultsCost per booked job, not cost per lead
Local SEO and contentBuilds steady inbound calls over monthsCalls and booked jobs from organic by month
Meta AdsCreates demand for planned work such as turf, landscaping, remodelsBooked jobs from form and message leads
Social and videoBuilds trust that lifts close rateClose rate and review volume
Nextdoor and referralsNeighborhood proof for local workBooked jobs per dollar

A reasonable first split for an established contractor is to put the largest share into the one or two channels with the lowest cost per booked job, a smaller share into the next, and 10% into a test. If you run Local Services Ads, read our LSA budget strategy before raising the cap. For Google search bidding, target CPA for lead gen explains how to set a cost target around booked jobs rather than raw leads.

For reference on what each line costs with us, Google Ads Management and Meta Ads Management are each $1,500 per month, SEO & Content starts at $2,000 per month and Social Media Management at $1,000 per month. These are management fees, separate from the ad spend you put into the platforms.

Step 4: Split the rest across channels

Step 5: Know when to raise, shift or cut

Use a plain decision rule per source. ProTradeHQ's version is a good one: increase spend when a source produces qualified calls or estimate requests, a visible close rate and profitable booked jobs. When calls and forms come in but do not turn into scheduled estimates, fix capture before adding spend.

Turned into a checklist:

  • Raise a source when cost per booked job is under your target for two or more months and you have open capacity.
  • Hold a source that is profitable but when your schedule is full.
  • Shift money from a source with plenty of leads and a low close rate toward one with fewer leads and more booked jobs.
  • Fix, then decide when volume is fine but estimates are not being set. Look at response time, call handling and follow-up first.
  • Cut only after you have checked that the source is tracked correctly. A source that looks dead may simply be untracked.

A short note on signage and print: if your trucks, yard signs and job-site signs are part of the mix, treat them like any channel and work out what they return. This overview of signage ROI for business owners shows how to think about it.

The monthly review that keeps spend honest

Set one meeting a month, thirty minutes, with the same one-page report each time. For every source, list:

  1. Calls and form fills.
  2. Estimates scheduled.
  3. Jobs booked and revenue.
  4. Cost per lead and cost per booked job.
  5. Close rate and average job value.

Then make three decisions: what to raise, what to move, what to fix. Keep a running record so you can see seasonal patterns by the second year. If you want the office to follow up faster between reviews, marketing automation for contractors describes the first 90 days.

Perspective

We think most contractors argue about the wrong number. They ask whether 6% or 10% of revenue is right, when the useful question is what a booked job costs and what happens to a lead in the first five minutes.

Our approach is to build the plumbing first. We engineer our AI lead dispatch and intent scoring in-house and host it on our own on-premise servers, so we are not passing your lead data through a third-party AI tool. The scoring is customized for home service workflows, and you work with senior strategists rather than a rotating account desk.

That structure is why we can manage a budget by booked jobs. When tracking, dispatch, CRM and ads are designed together, a dollar can be followed from the ad to the paid invoice, and the next dollar can go where the first one worked. Our partnerships with home service companies have produced a reported 20x return on ad spend, and the common thread is that we fixed conversion before we scaled spend.

Everson Gorski

Putting it together with Leapify Media

If you run a home service business with at least $500K in annual revenue, the fastest way to apply this article is to have the capture layer, the ads and the reporting built as one system. Our plans start at Foundation from $2,500 per month, Growth from $7,500, Scale from $15,000 and Enterprise from $25,000, and individual services such as ad management and AI dispatch can be added on their own. Details are on our pricing page, and our services page covers lead generation and CRM setup and automation.

Leapify Media

If you are deciding between building this in-house and handing it off, our comparison of in-house vs. agency marketing lays out the trade-offs. When you are ready to put your numbers through this process, start at leapifymedia.com.

FAQ

What percentage of revenue should a contractor spend on marketing?

There is no single right figure. It depends on your cost to acquire a customer, lifetime value, retention and growth goal. In one published example, the same $5M business needed about 4.8% of revenue at a $275 CAC and 7% at a $400 CAC. Calculate from jobs and close rate first, then use a percentage as a check.

Does the 70-20-10 rule work for contractors?

Yes, as a starting structure: most of the budget on channels that already book jobs, some on promising ones, and a small slice on tests. Adjust the shares to your own cost per booked job and available crew capacity rather than treating the ratio as fixed.

How do I calculate cost per booked job?

Divide the total spend on a source in a period, including management fees, by the number of paid jobs that source produced. This needs call tracking and a CRM that records which source each job came from. Compare the result with gross profit per job to see whether the source is paying for itself.

When should I increase my marketing budget?

When a source is producing qualified calls, a healthy close rate and profitable booked jobs, and your crews have open capacity. If leads arrive but few become scheduled estimates, improve call handling and follow-up first.

Sources